Saturday, 9 September 2017

Download Xiaomi Mi 2A SE Stock Rom/firmware

On this page, you will find the direct link to download the Xiaomi Mi 2A SE Stock ROM (original firmware).

Xiaomi Mi 2A SE key features

  • Body: 133 x 66.5 x 9.5 mm (5.24 x 2.62 x 0.37 in)
  • Screen: IPS LCD capacitive touchscreen, 16M colors 
  • Chipset: Qualcomm APQ8064 Snapdragon S4 Pro
  • OS: Android 4.1 (Jelly Bean), upgradable to 4.4.4 (KitKat) 
  • RAM: 1GB
  • Memory: 16/32 GB, 1 GB RAM
  • Camera: 8MP rear camera, f/2.2 aperture, PDAF, dual-LED dual-tone flash; 4K @ 30fps video, 720p @ 120fps
  • Selfies: 2 MP front camera, f/2.0 aperture; 1080p @ 30fps video
  • Connectivity: Dual SIM, LTE, Wi-Fi 802.11ac, Bluetooth 4.2, IR, USB-C, FM radio
  • Misc: Fingerprint sensor
  • Battery: Removable Li-Ion 2000 mAh battery

Important Note:

If you are an experienced software repair engineer, you can go straight to the download button that is at the end of the post to so as to save time. However, if you new or upcoming technician you should consider reading the whole post so as to avoid unnecessary damage or bricks.

Why do you want to flash

Phone flashing is the process of rewriting the firmware operating system on a device due to some problem that may have arisen during the process of using the device, some of this problem is as follows. forgotten security, malware commonly called virus effect which ranges from hanging on the logorestartingauto turn on internet connection, auto turn on WiFi connection, auto app installing. other may be just an upgrade of OS. Remember some problem can be easily solved by just factory reset

Important things to note

They are few important things to note before flashing any firmware so as to avoid bricks of the device. some are listed below

  1. Ensure you don't flash the wrong Firmware i.e try to know the build number and the variant of the firmware you are flashing. please read this post by hovatek team or that by
  2. Ensure you have at least 30% to 50% battery charge so as to avoid half flash
  3. please ensure you backup your important file before flashing eg contact, sms and media file (phone, music, and videos)
Requirement before flashing for flashing Xiaomi Mi 2A SE

  1. The device firmware
  2. The chipset flash tools Xiaomi Mi Flash Tool
  3. The chipset or device  Xiaomi Mi driver
  4. Good USB cable
  5. Your computer

Procedure for flashing Xiaomi Mi 2A SE

  1. Install WinrarSoftware in your Computer or Laptop, if already installed then ignore
  2. Download    Xiaomi Mi 2A SE ROM Firmware for flash file from the link provided below
  3. Extract Xiaomi Mi Firmware to as you like path better is desktop for easy access
  4. Open Xiaomi Mi Flash Tool
  5. Choose Click Select button and select the ROM  file from the location
  6. Switch off the device and bot it to fastboot ( press Volum Up and Down ) and Just Insert USB Cable to device when device is in fastboot
  7. Now click on flash
  8. Wait until finished process, do not try to unplug device while in flashing mode
  9. Congrats you have successfully flash  Xiaomi Mi 2A SE

Get the full tutorial on How to use Xiaomi MI Flash Tool

Download  Xiaomi Mi 2  SE Stock ROM Firmware

About Xiaomi

Xiaomi is a privately owned company that designs, develops, and sells smartphones, an Android-based OS, and other consumer electronics. Xiaomi also makes fitness trackers, TVs, air purifiers, and tablets. It has a skin for its Android phones and tablets – MIUI. The company largely sells its phones via flash sales in India.

No comments: