Saturday, 7 April 2018

How to fix an MTK or SPD phone that wont come on after interrupting during Flashing

Hi, everyone, in this post I will guide you on how to revive phone this brick as a result on interruption during flashing.

This guide will come as a relief for Mediatek (MTK) and Spreadtrum (SPD) Android device users who suddenly end up with a totally dead device that won't power up or respond to a button but however, makes a sound when connected to a PC. The cause may be as a result of intentionally or unintentionally interrupting the flash or backup process.

The interruption could be triggered by shaking/unplugging the USB cord or even an error popup/prompt in the tool you're using.

If you are facing this problem with you Phone which may of MTK chipset or SPD, then you are at the right place. Generally flashing process should not be interrupted but some time they are unavoidable due to accident disconnect.

If you are flashing and the process got interrupted and you now have a totally dead phone on your hands, don't panic.

To revive the connection process to continue flashing you will to following the step i will outline below.

Method 1

Start the flashing process from either sp flashtool, researchloader or any flash box that you are using. Now, Connect the phone to computer (via a USB cord) and hold the volume up and down combine till the flashing start.

Method 2

Connect the phone via USB cable to a power source and leave it to charge for some time. It could take between hours to even days but once the phone is revived, your battery could read as low as 1% . just leave it to keep charging before powering it up.

Method 3

Disconnect / take out the battery > Connect the phone to a charger without battery inside > Slot in the battery while the phone is still connected to the charger  > Press the power button.
You could keep pressing the Volume up + Power button while charging. lastly, You could remove and boost the battery using a desktop / external charger then resume internal charging.

T his process should fix or revive you phone after accident interruption. if you have any question drop it in the comment below.

No comments: