Thursday, 17 August 2017

How to install TWRP recovery and Root Huawei P10

This is a tutorial to  install TWRP recovery and root Huawei P10. In this guide you will find step by step with image, therefore it is safe and easy method of root Huawei P10 and install TWRP recovery. Huawei P10 is a flagship device from Huawei. The phone features a 5.5-inch FHD display with a resolution of with 1440 x 2560 pixels. The Huawei P10 Plus powered by a 1.7GHz octa-core Kirin 960 processor with 4/6GB of RAM. The phone has 64/128GB of internal storage which is expandable up to 256GB via a microSD card.
Huawei P10 is high end phone and if you must  root Huawei P10, to allow you to gain privilage and of your phone without any restrictions. After root you will be privilage to install custom Rom, apps, and setting in your phone. But before root you must know  Root Advantage and Disadvantage. Then after, follow these steps to root your phone.

Preparation of Huawei P10:

1. First you should take a backup of your phone.
2. Your phone battery should be charge minimum 80%.
3. Make sure proper power backup of your PC.
4. Unlock bootloader Huawei P10
Huawei P10 USB Driver Download
Huawei P10 unlock bootloader Download
Huawei P10 TWRP Recovery Download
Huawei P10 Download
Boot Image for Huawei P10 VTR-L29C10B120 Download
Boot Image for Huawei P10 VTR-L29C432B123 Download
Huawei P10 Fast-boot tool Download

Procedure for install TWRP recovery and rooting Huawei P10

  •  Download and install Huawei P10 ADB driver on your PC and enable Developer option and USB debugging mode on your Huawei P10.
  • Download and copy file in the phone or SD card.
  • Now download and extract TWRP Recovery and Fast-boot tool
  • move TWRP Recovery (recovery.img) file in the Fast-boot tool folder.
  • Then press and hold shift key in the keyboard and right click in the extracted Fast boot tool folder and select “Open command window here”

Step 2: Now connect Huawei P10 with PC via USB cable and type adb reboot bootloader to boot your phone in the bootloader( fastboot mode). if this CMD command does not work for reboot bootloader or fastboot mode, then switch off your Huawei P10 and press volume down and power button. You will get a vibration and your device will boot in recovery mode, then you select Reboot to Bootloader.

Important Note: Now your Huawei P10 in the bootloader ( fastboot mode), So you type fastboot devices in the command window then press enter key. This command show connected device in the command window and you can see your Smartphone serial number. If command window does not show your device serial number. Then install USB driver correctly or change your USB port of the PC.

Step 3: If your Huawei P10 connected, then type fastboot flash recovery recovery.img command in the command window and press enter key to flash TWRP recovery on Huawei P10.
Step 4: Now type fastboot boot recovery.img to boot in recovery mode. Then tap on install tab or button and select “” from your save location on your phone SD card and install this file.

Now reboot your phone, after that install phh supersu from playstore. If you want to check your Mobile rooted or not try this app Root checker.
Note: If you face the error ‘Error 1’ during installation in TWRP Recovery, then download the boot image and flash the image through fastboot using this command.

fastboot flash boot boot.img
I hope you like this root Huawei P10 and install TWRP recovery guide from which you will be able to easily root Huawei P10 and install TWRP recovery without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all.
Note: I am not responsible if you make Mistakes and Bricked Devices.

No comments: